Picture of Bernd Markert

Person

Prof. Dr.-Ing.

Bernd Markert

Universitätsprofessor
Chair and Institute of General Mechanics

Director of the Institute, Rectorate representative for Alumni

Address

Building: 1220

Room: 401

Eilfschornsteinstraße 18

52062 Aachen

Contact

WorkPhone
Phone: +49 241 80 94600
 

CV

Fellowships, Prizes, Awards and Memberships

LinkedIn

ResearchGate

Google Scholar

 

» Current Positions

March 2019 Visiting Professor, Tsinghua-University in Peking, China

October 2017

Advisory Board Member, Georgia Tech Lorraine in Metz, Frankreich
Januar 2016 Executive Board Member of proRWTH, RWTH Aachen University, Germany
September 2015 Rectors Delegate for Alumni, RWTH Aachen University, Germany
September 2015

Concurrent Professor at Nanjing Forestry University, China

Februar 2015 Honorary Adjunct Professor at Department of Engineering and Science, University Agder, Norway
August 2013 Scientific Director of the International Master Programme in Computer Aided Mechanical Engineering (CAME) aund Management and Engineering in Computer Aided Mechanical Engineering (MME-CAME) at RWTH International Academy gGmbH, Germany
August 2013 Full Professor and Director of the Institute of General Mechanics (IAM) at RWTH Aachen University, Germany, Faculty of Mechanical Engineering
 

» Previous Positionen

October 2016 -
May 2019
Vice Dean for Teaching of the Faculty of Mechanical Engineering, RWTH Aachen University, Germany
2013 Adjunct Professor (apl. Prof.) at University of Stuttgart, Germany, Faculty of Civil and Environmental Engineering
2002 - 2013 Tenure Senior Lecturer at Institute of Applied Mechanics (Civil Engineering), University of Stuttgart, Germany, Faculty of Civil and Environmental Engineering
1998 - 2002 Research Associate and Assistant Lecturer at Institute of Applied Mechanics (Civil Engineering), University of Stuttgart, Germany
 

Publications

Title Author(s)
Efficient Finite Element Modeling of Piezoelectric Transducers for Wave-Propagation-Based Analysis
Journal Article (2023)
Kocur, Georg K. (Corresponding author)
Markert, Bernd
A non-isothermal phase-field hydraulic fracture modeling in saturated porous media with convection-dominated heat transport
Journal Article (2023)
Nguyen, Cam-Lai
Heider, Yousef (Corresponding author)
Markert, Bernd
Special Issue: 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)
Proceedings (2023)
Böhm, Christoph (Editor)
Mang, Katrin (Editor)
Markert, Bernd (Editor)
Reese, Stefanie (Editor)
Schmidtchen, Markus (Editor)
Waimann, Johanna (Editor)
Kaliske, Michael (Editor)
Migration and remodeling in cartilage replacement materials - an in‐vitro bioreactor study
Contribution to a conference proceedings, Journal Article (2023)
Salazar Ortiz, Rodrigo (Corresponding author)
Dursun, Gözde
Topol, Heiko
Markert, Bernd
Stoffel, Marcus
Extension of an In Vitro Spine Test Rig to Track Load‐dependent Biomechanics of the Lumbar Spine under Physiological Conditions
Contribution to a conference proceedings, Journal Article (2023)
Brenzel, Katharina (Corresponding author)
Blomeyer, Nadja
Johnen, Laura
Praster, Maximilian
Röhrig, Max
Topol, Heiko
Brandl, Christopher
Markert, Bernd
Stoffel, Marcus
Post-bifurcation of inflated fibrous cylindrical membranes under different fiber configurations
Journal Article (2023)
Topol, Heiko (Corresponding author)
Asghari, Hadi
Stoffel, Marcus
Markert, Bernd
Merodio, José
Application of sensitivity analysis in extension, inflation, and torsion of residually stressed circular cylindrical tubes
Journal Article (2023)
Asghari, Hadi
Topol, Heiko (Corresponding author)
Markert, Bernd
Merodio, José
A multiscale study of the retention behavior and hydraulic anisotropy in deformable porous media
Contribution to a conference proceedings, Journal Article (2023)
Chaaban, Mohamad
Heider, Yousef (Corresponding author)
Markert, Bernd
A hybrid first/third-order plate theory for finite element analysis of sandwich plates with a transversely compressible core
Journal Article (2023)
Gao, Y. S.
Zhang, S. Q. (Corresponding author)
Zhao, Y. F.
Ma, Songyun (Corresponding author)
He, W. G.
Zhao, G. Z.
Markert, Bernd
Modelling of time‐dependent fatigue crack growth of hydrogels
Contribution to a conference proceedings, Journal Article (2023)
Liu, Dongxu (Corresponding author)
Ma, Songyun
Markert, Bernd
Molecular Dynamics Study on the Effect of Interfacial Cellullose Polymers in Strengthening the Stress Transfer Between Alumina Nanoparticles and Epoxy
Contribution to a conference proceedings, Journal Article (2023)
Al-Maharma, Ahmad Y. (Corresponding author)
Bamer, Franz
Markert, Bernd
Physically constrained deep recurrent neural network for stiffness computation of plate structures
Contribution to a conference proceedings, Journal Article (2023)
Tandale, Saurabh Balkrishna (Corresponding author)
Markert, Bernd
Stoffel, Marcus
In vitro degradation behaviour of biodegradable magnesium alloys
Contribution to a conference proceedings, Journal Article (2023)
Nachtsheim, Julia (Corresponding author)
Burja, Jaka
Ma, Songyun
Markert, Bernd
Graph Neural Network enhanced Finite Element modelling
Contribution to a conference proceedings, Journal Article (2023)
Gulakala, Rutwik
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Bifurcation of fiber reinforced inflated membranes with different natural configurations of the constituents
Contribution to a conference proceedings, Journal Article (2023)
Topol, Heiko (Corresponding author)
Demirkoparan, Hasan
Stoffel, Marcus
Markert, Bernd
Merodio, José
Modeling the thermomechanical processes and residual stresses in additive manufacturing of metallic components
Contribution to a conference proceedings, Journal Article (2023)
Ali, Baharin Rahim Ali (Corresponding author)
Heider, Yousef
Markert, Bernd
Enhanced Hamiltonian Monte Carlo simulations using Hamiltonian neural networks
Contribution to a conference proceedings, Journal Article (2023)
Thaler, Denny (Corresponding author)
Dhulipala, Somayajulu L. N.
Bamer, Franz
Markert, Bernd
Shields, Michael D.
Special Issue: 92nd Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)
Proceedings (2022)
Böhm, Christoph (Editor)
Mang, Katrin (Editor)
Markert, Bernd (Editor)
Reese, Stefanie (Editor)
Schmidtchen, Markus (Editor)
Waimann, Johanna (Editor)
Kaliske, Michael (Editor)
Finite element analysis of functionally graded magneto-electro-elastic porous cylindrical shells subjected to thermal loads
Journal Article (2023)
Zhao, Ya-Fei
Gao, Ying-Shan
Wang, Xiang
Markert, Bernd
Zhang, Shun-Qi (Corresponding author)
Innovative technologies in construction, civil engineering and architecture
Book, Proceedings (2023)
Awrejcewicz, : Jan
Danishevskyy, Vladyslav
Markert, Bernd
Novomlynets, Oleh
Savytskyi, Mykola
Tereshchuk, Oleksiy
Unčík, Stanislav
Prediction of Temperature and Loading History Dependent Lumbar Spine Biomechanics Under Cyclic Loading Using Recurrent Neural Networks
Journal Article (2023)
Blomeyer, Nadja (Corresponding author)
Tandale, Saurabh Balkrishna
Nicolini, Luis Fernando
Kobbe, Philipp
Pufe, Thomas
Markert, Bernd
Stoffel, Marcus
Molecular Mechanics of Disordered Solids
Journal Article (2023)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Markert, Bernd
Stamm, Benjamin
Large deflections of magneto-electro-elastic cylindrical shells reinforced with functionally graded carbon nanotubes
Journal Article (2022)
Zhao, Ya-Fei (Corresponding author)
Wang, Xiang Yu
Zhao, Guo-Zhong
Markert, Bernd
Zhang, Shun-Qi
A symplectic Brezis-Ekeland-Nayroles principle for dynamic plasticity in finite strains
Journal Article (2022)
Xiaodan, Cao
Oueslati, Abdelbacet (Corresponding author)
Nguyen, An Danh
Stoffel, Marcus
Markert, Bernd
de Saxcé, Géry
Rapid diagnosis of Covid-19 infections by a progressively growing GAN and CNN optimisation
Journal Article (2022)
Gulakala, Rutwik
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Generative adversarial network based data augmentation for CNN based detection of Covid-19
Journal Article (2022)
Gulakala, Rutwik
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Long-term in vitro corrosion of biodegradable we43 magnesium alloy in dmem
Contribution to a book, Journal Article (2022)
Nachtsheim, Julia
Burja, Jaka (Corresponding author)
Ma, Songyun (Corresponding author)
Markert, Bernd
Physics-Based Self-Learning Recurrent Neural Network enhanced time integration scheme for computing viscoplastic structural finite element response
Journal Article (2022)
Tandale, Saurabh Balkrishna
Bamer, Franz
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Life Science 4.0: Sensor Technology and Machine Learning in Motion Analysis
Contribution to a book (2022)
Mundt, Marion
Koeppe, Arnd
Bamer, Franz
Markert, Bernd (Corresponding author)
Mechanics 4.0: Artificial Intelligence for the Analysis of Mechanical Systems
Contribution to a book (2022)
Koeppe, Arnd (Corresponding author)
Hesser, Daniel Frank
Mundt, Marion
Bamer, Franz
Selzer, Michael
Markert, Bernd
Gradient-enhanced modelling of deformation-induced anisotropic damage in metallic glasses
Journal Article (2022)
Shi, Jianye
Ma, Songyun (Corresponding author)
Best, James P.
Stolpe, Moritz
Wei, Shuai
Zhang, Peilei
Markert, Bernd
An experimental-numerical method for the calibration of Finite Element models of the lumbar spine
Journal Article (2022)
Nicolini, Luis Fernando (Corresponding author)
Beckmann, Agnes
Laubach, Markus
Hildebrand, Frank
Kobbe, Philipp
de Mello Roesler, Carlos Rodrigo
Fancello, Eduardo Alberto
Markert, Bernd
Stoffel, Marcus
Displacement field splitting of defective hexagonal lattices
Journal Article (2022)
Focks, Tobias
Bamer, Franz (Corresponding author)
Markert, Bernd
Wu, Zhao
Stamm, Benjamin
A multiscale LBM-TPM-PFM approach for modeling of multiphase fluid flow in fractured porous media
Journal Article (2022)
Chaaban, Mohamad
Heider, Yousef (Corresponding author)
Markert, Bernd
Intelligent stiffness computation for plate and beam structures by neural network enhanced finite element analysis
Journal Article (2022)
Tandale, Saurabh Balkrishna
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Train the trainers in industry 4.0: a model for the development of competencies in non-synchronous environments
Journal Article (2022)
Ahuett-Garza, Horacio (Corresponding author)
Urbina Coronado, Pedro Daniel
Noriega Velasco, Julio
Díaz de León López, Enrique
Markert, Bernd
Kurfess, Thomas R.
Computational modelling of poro-visco-hyperelastic effects on time-dependent fatigue crack growth of hydrogels
Journal Article (2022)
Liu, Dongxu
Ma, Songyun (Corresponding author)
Yuan, Huang
Markert, Bernd
Non-incremental response evaluation in geometrically nonlinear structural dynamics using a space-time stiffness operator
Journal Article (2022)
Arjoune, Tahar
Markert, Bernd
Bamer, Franz (Corresponding author)
A Study of the Mechanical Response of Nonwovens Excited by Plate Vibration
Journal Article (2022)
Archut, Jan-Lukas (Corresponding author)
Kins, Ruben (Corresponding author)
Heider, Yousef (Corresponding author)
Cloppenburg, Frederik
Markert, Bernd
Gries, Thomas
Corves, Burkhard
Mechanical Properties of Dragline Silk Fiber Using a Bottom-Up Approach
Contribution to a book, Journal Article (2022)
Patil, Sandeep P. (Corresponding author)
Kulkarni, Ambarish
Markert, Bernd
Self-organized criticality in fracture models at different scales
Journal Article (2022)
Heider, Yousef (Corresponding author)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Markert, Bernd
Environmental impact analysis of plant fibers and their composites relative to their synthetic counterparts based on life cycle assessment approach
Contribution to a book (2022)
Al-Maharma, Ahmad Y.
Patil, Sandeep P.
Markert, Bernd
Closed form solutions for the dynamics of a pressurized elastoplastic thin-walled tube
Journal Article (2022)
Cao, X.
Oueslati, A. (Corresponding author)
Shirafkan, Nima
Bamer, Franz
Markert, Bernd
de Saxcé, G.
Explainable Artificial Intelligence for Mechanics: Physics-Explaining Neural Networks for Constitutive Models
Journal Article (2022)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Selzer, Michael
Nestler, Britta
Markert, Bernd
Smart stiffness computation of one-dimensional Finite Elements
Journal Article (2021)
Tandale, Saurabh Balkrishna
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Training Data Selection for Machine Learning-Enhanced Monte Carlo Simulations in Structural Dynamics
Contribution to a book, Journal Article (2022)
Thaler, Denny (Corresponding author)
Elezaj, Leonard
Bamer, Franz (Corresponding author)
Markert, Bernd
Modelling and simulation of coupled fluid transport and time-dependent fracture in fibre-reinforced hydrogel composites
Journal Article (2022)
Liu, Dongxu
Ma, Songyun (Corresponding author)
Yuan, Huang
Markert, Bernd
Residual stresses in gas tungsten arc welding : a novel phase-field thermo-elastoplasticity modeling and parameter treatment framework
Journal Article (2021)
Ali, Baharin Rahim Ali
Heider, Yousef (Corresponding author)
Markert, Bernd
Molecular dynamics simulation of interface atomic diffusion in ultrasonic metal welding : Effect of crystal orientation and sliding velocity
Journal Article (2021)
Mostafavi, Shimaalsadat (Corresponding author)
Bamer, Franz
Markert, Bernd
Monitoring and tracking of a suspension railway based on data-driven methods applied to inertial measurements
Journal Article (2021)
Hesser, Daniel Frank (Corresponding author)
Altun, Kubilay
Markert, Bernd
The effects of tether pretension within vertebral body tethering on the biomechanics of the spine : a Finite Element analysis
Journal Article (2022)
Nicolini, Luis Fernando
Greven, Johannes
Kobbe, Philipp
Hildebrand, Frank
Stoffel, Marcus
Markert, Bernd
Yllera, Borja Martinez
Simoes, Marcelo Simoni
de Mello Roesler, Carlos Rodrigo
Fancello, Eduardo Alberto
Biomechanical in Vitro and Finite Element Study On Different Sagittal Alignment Postures of the Lumbar Spine During Multiaxial Daily Motion
Journal Article (2021)
Wilmanns, Nadja (Corresponding author)
Beckmann, Agnes
Nicolini, Luis Fernando
Herren, Christian
Sobottke, Rolf
Hildebrand, Frank
Siewe, Jan
Kobbe, Philipp
Markert, Bernd
Stoffel, Marcus
Explainable artificial intelligence for mechanics: physics-informing neural networks for constitutive models
Preprint (2021)
Koeppe, Arnd
Bamer, Franz
Selzer, Michael
Nestler, Britta
Markert, Bernd
Mechanical Properties of Bioepoxy Polymers, Their Blends, and Composites
Contribution to a book (2021)
Al-Maharma, Ahmad Y.
Heider, Yousef
Markert, Bernd
Stoffel, Marcus
Motion preservation surgery for scoliosis with a vertebral body tethering system: a biomechanical study
Journal Article (2021)
Nicolini, Luis Fernando (Corresponding author)
Kobbe, Philipp
Seggewiß, Jana
Greven, Johannes
Ribeiro, Marx
Beckmann, Agnes
Da Paz, Stephanie
Eschweiler, Jörg
Prescher, Andreas
Markert, Bernd
Stoffel, Marcus
Hildebrand, Frank
Trobisch, Per D.
A comparison of two neural network architectures for fast structural response prediction
Contribution to a conference proceedings, Journal Article (2021)
Thaler, Denny (Corresponding author)
Bamer, Franz
Markert, Bernd
Numerical investigation of the Poisson's ratio of an amorphous bilayer 2D network material
Contribution to a conference proceedings, Journal Article (2021)
Stratmann, Jan Caspar (Corresponding author)
Bamer, Franz
Kataria, Satender
Lemme, Max C.
Markert, Bernd
Workflow concepts to model nonlinear mechanics with computational intelligence
Contribution to a conference proceedings, Journal Article (2021)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Selzer, Michael
Nestler, Britta
Markert, Bernd
A non-incremental solution procedure for elastoplastic problems in structural mechanics
Contribution to a conference proceedings, Journal Article (2021)
Bamer, Franz (Corresponding author)
Shirafkan, Nima
Cao, Xiaodan
Oueslati, Abdelbacet
Stoffel, Marcus
de Saxcé, Géry
Markert, Bernd
Cryosuction-induced fracturing in multiphase porous materials : Numerical modeling and experimental validation
Contribution to a conference proceedings, Journal Article (2021)
Heider, Yousef (Corresponding author)
Sweidan, Abdel Hassan
Markert, Bernd
Structural design of additively manufactured porous Zr-based bulk metallic glass
Contribution to a conference proceedings, Journal Article (2021)
Shi, Jianye (Corresponding author)
Ma, Songyun
Markert, Bernd
Constructing the Hamiltonian from the Behaviour of a Dynamical System by Proper Symplectic Decomposition
Contribution to a book, Contribution to a conference proceedings (2021)
Shirafkan, Nima
Gosselet, Pierre
Bamer, Franz
Oueslati, Abdelbacet
Markert, Bernd
de Saxcé, Géry
Molecular Dynamics Investigation on the Effect of MWCNTs on Thermo-Mechanical Properties of Amorphous Cellulose Reinforced with Silicon Carbide Nanotubes
Contribution to a book, Contribution to a conference proceedings (2021)
Al-Maharma, Ahmad Y. (Corresponding author)
Bamer, Franz
Markert, Bernd
Thermal conductivity of glass fiber-reinforced silica aerogels using molecular dynamics simulations
Journal Article (2021)
Patil, Sandeep P. (Corresponding author)
Bachhav, Bhagyashri S.
Markert, Bernd
Data-driven classification of elementary rearrangement events in silica glass
Journal Article (2021)
Bamer, Franz (Corresponding author)
Alshabab, Somar Shekh
Paul, Arghadwip
Ebrahem, Firaz
Markert, Bernd
Stamm, Benjamin
Development of convolutional neural networks for recognition of tenogenic differentiation based on cellular morphology
Journal Article (2021)
Dursun, Gözde
Tandale, Saurabh Balkrishna
Gulakala, Rutwik
Eschweiler, Jörg
Tohidnezhad, Mersedeh
Markert, Bernd
Stoffel, Marcus (Corresponding author)
A Comparison of Three Neural Network Approaches for Estimating Joint Angles and Moments from Inertial Measurement Units
Contribution to a book, Journal Article (2021)
Mundt, Marion (Corresponding author)
Johnson, William R.
Potthast, Wolfgang
Markert, Bernd
Mian, Ajmal
Alderson, Jacqueline
A non-incremental numerical method for dynamic elastoplastic problems by the symplectic Brezis-Ekeland-Nayroles principle
Journal Article (2021)
Cao, Xiaodan
Oueslati, Abdelbacet (Corresponding author)
Shirafkan, Nima
Bamer, Franz
Markert, Bernd
de Saxcé, Géry
Designing of an Advanced Compression Bioreactor with an Implementation of a Low-Cost Controlling System Connected to a Mobile Application
Contribution to a book, Journal Article (2021)
Dursun, Gözde
Umer, Muhammad
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Identification of acoustic emission sources for structural health monitoring applications based on convolutional neural networks and deep transfer learning
Journal Article (2021)
Hesser, Daniel Frank (Corresponding author)
Mostafavi, Shimaalsadat
Kocur, Georg Karl
Markert, Bernd
Experimental study and numerical modeling of the thermo-hydro-mechanical processes in soil freezing with different frost penetration directions
Journal Article (2021)
Sweidan, Abdell Hassan
Niggemann, Katharina
Heider, Yousef (Corresponding author)
Ziegler, Martin
Markert, Bernd
A Monte Carlo Simulation Approach in Non-linear Structural Dynamics Using Convolutional Neural Networks
Journal Article (2021)
Bamer, Franz (Corresponding author)
Thaler, Denny (Corresponding author)
Stoffel, Marcus
Markert, Bernd
An All-Atom Simulation Study of Gas Detonation Forming Technique
Journal Article (2021)
Kulkarni, Ambarish
Karkaria, Vispi
Nandgaonkar, Milankumar
Patil, Sandeep P. (Corresponding author)
Markert, Bernd
Connecting structural defects to tensile failure in a 3D-printed fully-amorphous bulk metallic glass
Journal Article (2021)
Shi, Jianye
Ma, Songyun (Corresponding author)
Wei, Shuai (Corresponding author)
Best, James P.
Stolpe, Moritz
Markert, Bernd
A Newmark space-time formulation in structural dynamics
Journal Article (2021)
Bamer, Franz (Corresponding author)
Shirafkan, Nima
Cao, Xiaodan
Oueslati, Abdelbacet
Stoffel, Marcus
de Saxcé, Géry
Markert, Bernd
Design of a Vertical Loss-in-Weight Feeder Prototype with Experimental Proof of Concept Validationn
Journal Article (2021)
El Kassem, Bilal
Brinz, Thomas
Jenkouk, Vahid (Corresponding author)
Heider, Yousef
Markert, Bernd
Machine‐learning‐enhanced tail end prediction of structural response statistics in earthquake engineering
Journal Article (2021)
Thaler, Denny
Stoffel, Marcus
Markert, Bernd
Bamer, Franz (Corresponding author)
Shockwave response of graphene aerogels : An all-atom simulation study
Journal Article (2021)
Patil, Sandeep P. (Corresponding author)
Kulkarni, Ambarish
Markert, Bernd
A machine learning enhanced structural response prediction strategy due to seismic excitation
Contribution to a conference proceedings, Journal Article (2021)
Thaler, Denny (Corresponding author)
Bamer, Franz
Markert, Bernd
An artificial intelligence approach to model nonlinear continua by intelligent meta‐elements
Contribution to a conference proceedings, Journal Article (2021)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Markert, Bernd
Numerical study of shear bands formation in a 3D‐printed Zr‐based bulk metallic glass under uniaxial loading
Contribution to a conference proceedings, Journal Article (2021)
Shi, Jianye (Corresponding author)
Ma, Songyun
Markert, Bernd
On the Poisson's ratio of an amorphous 2D network material
Contribution to a conference proceedings, Journal Article (2021)
Stratmann, Jan Caspar (Corresponding author)
Ebrahem, Firaz
Bamer, Franz
Markert, Bernd
A thermomechanical‐phase‐field approach for modeling of residual stresses in fusion welding
Contribution to a conference proceedings, Journal Article (2021)
Ali, Baharin Rahim Ali (Corresponding author)
Heider, Yousef
Markert, Bernd
Advancements in multi‐phase unsaturated porous media fracture
Contribution to a conference proceedings, Journal Article (2021)
Heider, Yousef (Corresponding author)
Sun, WaiChing
Markert, Bernd
A Newmark space‐time approach in structural mechanics
Contribution to a conference proceedings, Journal Article (2021)
Bamer, Franz (Corresponding author)
Shirafkan, Nima
Cao, Xiaodan
Oueslati, Abdelbacet
Stoffel, Marcus
de Saxcé, Géry
Markert, Bernd
The Effect of Functionally‐Graded Voids and GNPs on the Damage Tolerance of Polyurethane Foam Core
Contribution to a conference proceedings, Journal Article (2021)
Al-Maharma, Ahmad Y. (Corresponding author)
Sendur, Polat
Patil, Sandeep P.
Markert, Bernd
A lattice Boltzmann study on the effect of fluid viscosity contrast on the retention behavior of two‐fluid flow in porous media
Contribution to a conference proceedings, Journal Article (2021)
Chaaban, Mohamad (Corresponding author)
Heider, Yousef
Markert, Bernd
Thermomechanical phase‐field fracture modeling of fluid‐saturated porous media
Contribution to a conference proceedings, Journal Article (2021)
Nguyen, Cam-Lai
Sweidan, Abdel Hassan
Heider, Yousef (Corresponding author)
Markert, Bernd
Mechanical modeling and simulation of aerogels : A review
Journal Article (2020)
Patil, Sandeep P. (Corresponding author)
Parale, Vinayak G.
Park, Hyung-Ho
Markert, Bernd
Automated identification of the coefficient of restitution via bouncing ball measurement
Journal Article (2021)
Kocur, Georg K. (Corresponding author)
Harmanci, Y. E.
Chatzi, E.
Steeb, H.
Markert, Bernd
A multivariate regression parametric study on DEM input parameters of free-flowing and cohesive powders with experimental data-based validation
Journal Article (2020)
El Kassem, Bilal
Salloum, Nizar
Brinz, Thomas
Heider, Yousef (Corresponding author)
Markert, Bernd
3D pore structure characterization and hardness in a powder bed fusion-processed fully amorphous Zr-based bulk metallic glass
Journal Article (2021)
Shi, Jianye
Ma, Songyun (Corresponding author)
Wei, Shuai (Corresponding author)
Best, James P.
Stolpe, Moritz
Beckmann, Agnes
Mostafavi, Shimaalsadat
Korte-Kerzel, Sandra
Markert, Bernd
Mechanik 4.0. Künstliche Intelligenz zur Analyse mechanischer Systeme
Contribution to a book (2019)
Koeppe, Arnd
Hesser, Daniel Frank
Mundt, Marion
Bamer, Franz
Markert, Bernd (Corresponding author)
Lebenswissenschaften 4.0 : Sensorik und maschinelles Lernen in der Bewegungsanalyse
Contribution to a book (2020)
Mundt, Marion
Koeppe, Arnd
Bamer, Franz
Markert, Bernd (Corresponding author)
Creating Virtual Force Platforms for Cutting Maneuvers from Kinematic Data Based on LSTM Neural Networks
Contribution to a conference proceedings, Journal Article (2020)
Fohrmann, Dominik
Mundt, Marion
David, Sina
Koeppe, Arnd
Markert, Bernd
Potthast, Wolfgang
Feature Selection for the Application of Artificial Neural Networks in Motion Analysis
Contribution to a conference proceedings, Journal Article (2020)
Mundt, Marion
Koeppe, Arnd
Bamer, Franz
Potthast, Wolfgang
Markert, Bernd
IMU-Based Activity Recognition of the Basketball Jump Shot
Contribution to a conference proceedings, Journal Article (2020)
Eggert, Björn
Mundt, Marion
Markert, Bernd
Large strain viscoelastic swelling of charged hydrated porous media
Contribution to a book (2002)
Ehlers, W.
Markert, Bernd
Acartürk, A.
Recognition of tenogenic differentiation using convolutional neural network
Contribution to a conference proceedings, Journal Article (2020)
Dursun, Gözde (Corresponding author)
Tandale, Saurabh Balkrishna
Eschweiler, Jörg
Tohidnezhad, Mersedeh
Markert, Bernd
Stoffel, Marcus
On space-time formulations in structural mechanics using the proper generalized decomposition
Conference Presentation (2020)
Bamer, Franz (Corresponding author)
Bamer, Franz
Shirafkan, Nima
Oueslati, Abdelbacet
Stoffel, Marcus
De Saxcé, Géry
Markert, Bernd
Effects of porosity on the mechanical properties of additively manufactured components: a critical review
Journal Article (2020)
Al-Maharma, Ahmad Y.
Patil, Sandeep P. (Corresponding author)
Markert, Bernd
Prediction of ground reaction force and joint moments based on optical motion capture data during gait
Journal Article (2020)
Mundt, Marion (Corresponding author)
Koeppe, Arnd
David, Sina
Bamer, Franz
Potthast, Wolfgang
Markert, Bernd
Origin of reversible and irreversible atomic-scale rearrangements in a model two-dimensional network glass
Journal Article (2020)
Ebrahem, Firaz (Corresponding author)
Bamer, Franz
Markert, Bernd
Structural health monitoring of an adhesively bonded CFRP aircraft fuselage by ultrasonic Lamb Waves
Contribution to a book, Journal Article (2020)
Weiland, Josef (Corresponding author)
Hesser, Daniel Frank
Xiong, W.
Schiebahn, Alexander
Markert, Bernd
Reisgen, Uwe
A multivariate statistical approach to analyze the impact of material attributes and process parameters on the quality performance of an auger dosing process
Journal Article (2020)
El Kassem, Bilal
Heider, Yousef (Corresponding author)
Brinz, Thomas
Markert, Bernd
A unified water/ice kinematics approach for phase-field thermo-hydro-mechanical modeling of frost action in porous media
Journal Article (2020)
Sweidan, Abdel Hassan
Heider, Yousef (Corresponding author)
Markert, Bernd
Artificial Neural Networks in Motion Analysis : Applications of Unsupervised and Heuristic Feature Selection Techniques
Contribution to a book, Journal Article (2020)
Mundt, Marion
Koeppe, Arnd
Bamer, Franz (Corresponding author)
David, Sina
Markert, Bernd
Frequency-related viscoelastic properties of the human incisor periodontal ligament under dynamic compressive loading
Journal Article (2020)
Wu, Bin
Pu, Panjun
Zhao, Siyu
Izadikhah, Iman
Shi, Haotian
Liu, Mao
Lu, Ruxin
Yan, Bin (Corresponding author)
Ma, Songyun
Markert, Bernd
Molecular Dynamics Simulation Study of the Mechanical Properties of Nanocrystalline Body-Centered Cubic Iron
Contribution to a book, Journal Article (2020)
Herman, Jan
Govednik, Marko
Patil, Sandeep P. (Corresponding author)
Markert, Bernd
Ultrasonic weld strength and weld microstructure characteristics in multi-strand aluminum cables (EN AW-1370) : Effect of process parameters
Journal Article (2020)
Mostafavi, Shimaalsadat (Corresponding author)
Markert, Bernd
Deep convolutional neural networks in structural dynamics under consideration of viscoplastic material behaviour
Journal Article (2020)
Stoffel, Marcus (Corresponding author)
Bamer, Franz
Markert, Bernd
Molecular Investigation of Mechanical Properties and Fracture Behavior of Graphene Aerogel
Journal Article (2020)
Patil, Sandeep P. (Corresponding author)
Shendye, Parag
Markert, Bernd
A Semi-Automated DEM Parameter Calibration Technique of Powders Based on Different Bulk Responses Extracted from Auger Dosing Experiments
Journal Article (2020)
El Kassem, Bilal
Salloum, Nizar
Brinz, Thomas
Heider, Yousef (Corresponding author)
Markert, Bernd
Upscaling LBM-TPM simulation approach of Darcy and non-Darcy fluid flow in deformable, heterogeneous porous media
Journal Article (2020)
Chaaban, Mohamad
Heider, Yousef (Corresponding author)
Markert, Bernd
Active source localization in wave guides based on machine learning
Journal Article (2020)
Hesser, Daniel Frank (Corresponding author)
Kocur, Georg Karl
Markert, Bernd
An intelligent nonlinear meta element for elastoplastic continua: deep learning using a new Time-distributed Residual U-Net architecture
Journal Article (2020)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Markert, Bernd
Continuous Zachariasen carbon monolayers under tensile deformation: Insights from molecular dynamics simulations
Journal Article (2020)
Ebrahem, Firaz
Stratmann, Jan Caspar
Stoffel, Marcus
Markert, Bernd
Bamer, Franz (Corresponding author)
Mechanical Properties of Nacre-Like Composites: A Bottom-Up Approach
Journal Article (2020)
Raj, Mayank
Patil, Sandeep P. (Corresponding author)
Markert, Bernd
Validation of two hybrid approaches for clustering age-related groups based on gait kinematics data
Journal Article (2020)
Caldas, Rafael (Corresponding author)
Sarai, Rebeca
Buarque de Lima Neto, Fernando
Markert, Bernd
Artificial neural networks in structural dynamics : A new modular radial basis function approach vs. convolutional and feedforward topologies
Journal Article (2020)
Stoffel, Marcus (Corresponding author)
Gulakala, Rutwik
Bamer, Franz
Markert, Bernd
Vitreous 2D silica under tension: From brittle to ductile behaviour
Journal Article (2020)
Ebrahem, Firaz
Bamer, Franz (Corresponding author)
Markert, Bernd
Quasistatic analysis of elastoplastic structures by the proper generalized decomposition in a space-time approach
Journal Article (2020)
Shirafkan, Nima
Bamer, Franz (Corresponding author)
Stoffel, Marcus
Markert, Bernd
Molecular dynamics simulations of silica aerogel nanocomposites reinforced by glass fibers, graphene sheets and carbon nanotubes: A comparison study on mechanical properties
Journal Article (2020)
Patil, Sandeep P. (Corresponding author)
Shendye, Parag
Markert, Bernd
Adaptive predictive systems applied to gait analysis: A systematic review
Journal Article (2020)
Caldas, Rafael (Corresponding author)
Fadel, Tariq
Buarque, Fernando
Markert, Bernd
Structural health monitoring (SHM) of an adhesively bonded CFRP aircraft fuselage by ultrasonic lamb wave
Abstract, Contribution to a book, Contribution to a conference proceedings (2020)
Weiland, Josef (Corresponding author)
Hesser, Daniel Frank
Schiebahn, Alexander
Markert, Bernd
Reisgen, Uwe
Estimation of Gait Mechanics Based on Simulated and Measured IMU Data Using an Artificial Neural Network
Journal Article (2020)
Mundt, Marion (Corresponding author)
Koeppe, Arnd
David, Sina
Witter, Tom
Bamer, Franz
Potthast, Wolfgang
Markert, Bernd
A biphasic visco-hyperelastic damage model for articular cartilage : application to micromechanical modelling of the osteoarthritis-induced degradation behaviour
Journal Article (2019)
Liu, Dongxu
Ma, Songyun (Corresponding author)
Stoffel, Marcus
Markert, Bernd
Elementary plastic events in a Zachariasen glass under shear and pressure
Journal Article (2019)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Markert, Bernd
Mechanical properties and behavior of glass fiber-reinforced silica aerogel nanocomposites : Insights from all-atom simulations
Journal Article (2019)
Patil, Sandeep P. (Corresponding author)
Shendye, Parag
Markert, Bernd
Biomechanical In Vitro Test of a Novel Dynamic Spinal Stabilization System Incorporating Polycarbonate Urethane Material Under Physiological Conditions
Journal Article (2019)
Beckmann, Agnes (Corresponding author)
Nicolini, Luis Fernando (Corresponding author)
Grevenstein, David (Corresponding author)
Backes, Hermann (Corresponding author)
Oikonomidis, Stavros (Corresponding author)
Sobottke, Rolf (Corresponding author)
Kobbe, Philipp (Corresponding author)
Hildebrand, Frank (Corresponding author)
Stoffel, Marcus (Corresponding author)
Markert, Bernd (Corresponding author)
Siewe, Jan (Corresponding author)
Herren, Christian (Corresponding author)
The influence of filter parameters on the prediction accuracy of the ground reaction force and joint moments
Contribution to a conference proceedings, Journal Article (2019)
David, Sina
Mundt, Marion
Koeppe, Arnd
Bamer, Franz
Markert, Bernd
Potthast, Wolfgang
Joint angle estimation during fast cutting manoeuvres using artificial neural networks
Contribution to a conference proceedings (2019)
Mundt, Marion
David, Sina
Koeppe, Arnd
Bamer, Franz
Potthast, Wolfgang
Markert, Bernd
Prediction of the 3D ground reaction force during rollator supported and unsupported gait in old persons using artificial neural networks
Conference Presentation (2019)
Mundt, Marion (Corresponding author)
Witter, Tom
Koeppe, Arnd
Batista Jr., João P.
Laurentius, Thea
Bollheimer, Cornelius
Markert, Bernd
Thermo-hydro-mechanical modeling of liquid freezing in saturated porous media
Contribution to a conference proceedings (2019)
Sweidan, Abdel Hassan (Corresponding author)
Heider, Yousef
Markert, Bernd
A damage detection study of a bridge using bypassing vehicles and computational intelligence
Contribution to a conference proceedings, Journal Article (2019)
Hesser, Daniel Frank (Corresponding author)
Bamer, Franz
Markert, Bernd
Phase field modelling of stress assisted corrosion of biodegradable magnesium alloys
Contribution to a conference proceedings, Journal Article (2019)
Ma, Songyun (Corresponding author)
Zhang, Dawei
Markert, Bernd
Experimental Study on Cell-free Approach for Articular Cartilage Treatment
Journal Article (2019)
Dursun, Gözde (Corresponding author)
Markert, Bernd
Stoffel, Marcus
Molecular dynamics simulation of ultrasonic metal welding of aluminum alloys
Contribution to a conference proceedings, Journal Article (2019)
Mostafavi, Shimaalsadat (Corresponding author)
Markert, Bernd
On the fracture behavior of vitreous two-dimensional silica
Contribution to a conference proceedings, Journal Article (2019)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Stratmann, Jan Caspar
Markert, Bernd
Modelling silica bilayers based on experimental data
Contribution to a conference proceedings, Journal Article (2019)
Stratmann, Jan Caspar (Corresponding author)
Ebrahem, Firaz
Bamer, Franz
Markert, Bernd
Stress response of 2D silica under quasi-static tension
Contribution to a conference proceedings, Journal Article (2019)
Ebrahem, Firaz (Corresponding author)
Bamer, Franz
Markert, Bernd
Prediction of lower limb joint angles and moments during gait using artificial neural networks
Journal Article (2019)
Mundt, Marion (Corresponding author)
Thomsen, Wolf
Witter, Tom
Koeppe, Arnd
David, Sina
Bamer, Franz
Potthast, Wolfgang
Markert, Bernd
Stone-Wales defect interaction in quasistatically deformed 2D silica
Journal Article (2019)
Ebrahem, Firaz (Corresponding author)
Bamer, Franz
Markert, Bernd
Investigation of Sheet Metal Forming Using a Rapid Compression Machine
Contribution to a book, Journal Article (2019)
Patil, Sandeep P. (Corresponding author)
Fenard, Yann
Bailkeri, Shridhar
Heufer, Karl Alexander
Markert, Bernd
Chondrocyte colonisation of a tissue-engineered cartilage substitute under a mechanical stimulus
Journal Article (2019)
Nachtsheim, Julia (Corresponding author)
Dursun, Gözde
Markert, Bernd
Stoffel, Marcus
Identification of Active and Passive Sources Using Elastic Waves and Computational Intelligence
Contribution to a book, Contribution to a conference proceedings (2019)
Hesser, Daniel Frank (Corresponding author)
Kocur, Georg K.
Markert, Bernd
Modeling of PCM-based enhanced latent heat storage systems using a phase-field-porous media approach
Contribution to a book, Journal Article (2019)
Sweidan, Abdel Hassan
Heider, Yousef (Corresponding author)
Markert, Bernd
Walking with rollator: a systematic review of gait parameters in older persons
Journal Article (2019)
Mundt, Marion (Corresponding author)
Batista Jr., João P.
Markert, Bernd
Bollheimer, Leo Cornelius
Laurentius, Thea
A substructure formulation for the earthquake-induced nonlinear structural pounding problem
Journal Article (2019)
Shi, Jianye (Corresponding author)
Bamer, Franz (Corresponding author)
Markert, Bernd (Corresponding author)
A Molecular dynamics study of the interface temperature in ultrasonic metal welding
Contribution to a book, Contribution to a conference proceedings (2019)
Mostafavi, Shimaalsadat (Corresponding author)
Patil, Sandeep P.
Markert, Bernd
Representation of micro-structural evolution and thermo-mechanical damage in thermal shocked oxide/oxide ceramic matrix composites
Journal Article (2019)
Yang, Zhengmao
Yuan, Huang (Corresponding author)
Markert, Bernd
A visco-elastoplastic pounding damage formulation
Journal Article (2019)
Bamer, Franz (Corresponding author)
Strubel, Nicolas
Shi, Jianye
Markert, Bernd
An efficient Monte Carlo strategy for elasto-plastic structures based on recurrent neural networks
Journal Article (2019)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Markert, Bernd
Intelligent prediction of kinetic parameters during cutting manoeuvres
Journal Article (2019)
Mundt, Marion (Corresponding author)
David, Sina
Koeppe, Arnd
Bamer, Franz
Markert, Bernd
Potthast, Wolfgang
Stability of feed forward artificial neural networks versus nonlinear structural models in high speed deformations: A critical comparison
Journal Article (2019)
Stoffel, Marcus (Corresponding author)
Bamer, Franz
Markert, Bernd
Molecular dynamics investigation of the shock response of silica aerogels
Journal Article (2019)
Patil, Sandeep P. (Corresponding author)
Shendye, Parag
Markert, Bernd
Fretting wear modelling incorporating cyclic ratcheting deformations and the debris evolution for Ti-6Al-4V
Journal Article (2019)
Zhang, Le
Ma, Songyun (Corresponding author)
Liu, Dongxu
Zhou, Bei
Markert, Bernd
Detection of terminal oscillation pattern in ultrasonic metal welding
Journal Article (2019)
Mostafavi, Shimaalsadat (Corresponding author)
Hesser, Daniel Frank
Markert, Bernd
Athermal mechanical analysis of Stone-Wales defects in two-dimensional silica
Journal Article (2019)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Markert, Bernd
Viscoelastic properties of human periodontal ligament : Effects of the loading frequency and location
Journal Article (2019)
Wu, Bin
Zhao, Siyu
Shi, Haotian
Lu, Ruxin
Yan, Bin (Corresponding author)
Ma, Songyun
Markert, Bernd
Is bone-cement augmentation of screw-anchor fixation systems superior in unstable femoral neck fractures? : A biomechanical cadaveric study
Journal Article (2018)
Knobe, Matthias (Corresponding author)
Bettag, Sebastian
Kammerlander, Christian
Altgassen, Simon
Maier, Klaus-Jürgen
Nebelung, Sven
Prescher, Andreas
Horst, Klemens
Pishnamaz, Miguel Seyed Mahmud Agha Seid Mohammad
Herren, Christian
Mundt, Marion
Stoffel, Marcus
Markert, Bernd
Gueorguiev, Boyko
Neural network based constitutive modeling of nonlinear viscoplastic structural response
Journal Article (2019)
Stoffel, Marcus (Corresponding author)
Bamer, Franz
Markert, Bernd
Assessment of the measurement accuracy of inertial sensors during different tasks of daily living
Journal Article (2018)
Mundt, Marion (Corresponding author)
Thomsen, Wolf
David, Sina
Dupré, Thomas
Bamer, Franz
Potthast, Wolfgang
Markert, Bernd
Biomechanical testing of a polycarbonate-urethane-based dynamic instrumentation system under physiological conditions
Journal Article (2018)
Beckmann, Agnes (Corresponding author)
Herren, Christian
Nicolini, Luis Fernando
Grevenstein, David
Oikonomidis, Stavros
Kobbe, Philipp
Hildebrand, Frank
Stoffel, Marcus
Markert, Bernd
Siewe, Jan
Molecular dynamics and experimental studies of nanoindentation on nanoporous silica aerogels
Journal Article (2018)
Patil, Sandeep P. (Corresponding author)
Parale, Vinayak G.
Park, Hyung-Ho
Markert, Bernd
Tool wear monitoring of a retrofitted CNC milling machine using artificial neural networks
Journal Article (2018)
Hesser, Daniel Frank (Corresponding author)
Markert, Bernd
Plasticity in vitreous silica induced by cyclic tension considering rate-dependence : Role of the network topology
Journal Article (2018)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Markert, Bernd
Wide Frequency Higher-Order Dynamic Model for Transient Waves in a Lattice
Contribution to a book (2018)
Andrianov, Igor Vasylovyc
Danishevskyy, Vladyslav V. (Corresponding author)
Kaplunov, Julius D.
Markert, Bernd
Experimental study and discrete element simulation of auger dosing of different pharmaceutical powders
Contribution to a conference proceedings, Journal Article (2018)
El Kassem, Bilal (Corresponding author)
Brinz, Thomas
Heider, Yousef
Markert, Bernd
A computational study on the cyclic softening and fatigue behaviour of medical PEEK
Contribution to a conference proceedings, Journal Article (2018)
Beckmann, Agnes (Corresponding author)
Ma, Songyun
Zhang, Le
Stoffel, Marcus
Markert, Bernd
Computational modelling of fretting wear of Ti‐6Al‐4V incorporating cyclic plastic deformations and the debris evolution
Contribution to a conference proceedings, Journal Article (2018)
Zhang, Le
Ma, Songyun (Corresponding author)
Markert, Bernd
The effect of the collagen fibrils network on the damage behaviour of articular cartilage: a computational study
Contribution to a conference proceedings, Journal Article (2018)
Liu, Dongxu (Corresponding author)
Ma, Songyun
Stoffel, Marcus
Markert, Bernd
A coupled thermo‐poro‐mechanical model of the breast applied to breast cancer detection
Contribution to a conference proceedings, Journal Article (2018)
Niedermeyer, Angela Monika
Ma, Songyun (Corresponding author)
Markert, Bernd
Computational study of the interaction between degradation of biodegradable magnesium implants and bone remodelling
Contribution to a conference proceedings, Journal Article (2018)
Ma, Songyun (Corresponding author)
Markert, Bernd
A thermo‐mechanical model of ultrasonic metal welding process with the focus on the mating interface
Contribution to a conference proceedings, Journal Article (2018)
Mostafavi, Shimaalsadat (Corresponding author)
Heider, Yousef
Markert, Bernd
Guided wave‐based damage detection in solids using computational intelligence
Contribution to a conference proceedings, Journal Article (2018)
Hesser, Daniel Frank (Corresponding author)
Markert, Bernd
The effect of the medium‐range configuration on the atomistic fracture behaviour of vitreous silica
Contribution to a conference proceedings, Journal Article (2018)
Ebrahem, Firaz (Corresponding author)
Bamer, Franz
Markert, Bernd
Determination of gait parameters in real‐world environment using low‐cost inertial sensors
Contribution to a conference proceedings, Journal Article (2018)
Mundt, Marion (Corresponding author)
Thomsen, Wolf
Bamer, Franz
Markert, Bernd
On the reduced solution of the earthquake‐induced pounding problem
Contribution to a conference proceedings, Journal Article (2018)
Shi, Jianye (Corresponding author)
Bamer, Franz
Markert, Bernd
Investigation of the network topology of vitreous silica during cyclic tensile loading
Contribution to a conference proceedings, Journal Article (2018)
Bamer, Franz (Corresponding author)
Ebrahem, Firaz
Markert, Bernd
An intelligent meta‐element for linear elastic continua
Contribution to a conference proceedings, Journal Article (2018)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Markert, Bernd
A direct method for dissipative dynamical systems by using the symplectic Brezis‐Ekeland‐Nayroles principle
Contribution to a conference proceedings, Journal Article (2018)
Nguyen, An-Danh (Corresponding author)
Markert, Bernd
Finite element formulation of elastoplastic structures by using the symplectic Brezis‐Ekeland‐Nayroles principle
Contribution to a conference proceedings, Journal Article (2018)
Shirafkan, Nima (Corresponding author)
Nguyen, An-Danh
Stoffel, Marcus
Markert, Bernd
An investigation on residual stresses in gas tungsten arc welding
Contribution to a conference proceedings, Journal Article (2018)
Ali, Baharin Rahim Ali (Corresponding author)
Nguyen, An Danh
Markert, Bernd
Chondrocyte migration in an acellular tissue‐engineered cartilage substitute
Contribution to a conference proceedings, Journal Article (2018)
Nachtsheim, Julia
Dursun, Gözde
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Investigation of Tenocyte Migration Behaviour by Application of the Mechanobiological Concepts
Contribution to a conference proceedings, Journal Article (2018)
Dursun, Gözde (Corresponding author)
Ürek-Yavas, Dilmin
Tohidnezhad, Mersedeh
Markert, Bernd
Stoffel, Marcus
Tensile testing of the mechanical behavior of the human periodontal ligament
Journal Article (2018)
Wu, Bin
Fu, Yipeng
Shi, Haotian
Yan, Bin (Corresponding author)
Lu, Ruxin
Ma, Songyun
Markert, Bernd
Study of temperature and wear variations of aluminium in general dry sliding contact
Journal Article (2018)
Malik, Jawad Ali Shakoor (Corresponding author)
Koetniyom, Saiprasit
Lamjahdy, Abdelkrim
Markert, Bernd
A study of the damage behaviour of porcine intervertebral discs in a bioreactor environment
Journal Article (2017)
Azarnoosh, Marzieh (Corresponding author)
Stoffel, Marcus
Markert, Bernd
Phase-field-based modelling of the gelation process of biopolymer droplets in 3D bioprinting
Journal Article (2018)
Zhou, Bei
Heider, Yousef
Ma, Songyun (Corresponding author)
Markert, Bernd
Effects of uniaxial stretching on tenocyte migration behaviour
Journal Article (2018)
Dursun, Gözde (Corresponding author)
Tohidnezhad, Mersedeh (Corresponding author)
Markert, Bernd (Corresponding author)
Stoffel, Marcus
A novel approach to calibrate the Drucker-Prager Cap model for Al7075 powder
Journal Article (2018)
Atrian, A. (Corresponding author)
Majzoobi, G. H.
Markert, Bernd
Nourbakhsh, S. H.
Modeling of hydraulic fracturing using a porous-media phase-field approach with reference to experimental data
Journal Article (2018)
Heider, Yousef (Corresponding author)
Reiche, Sönke
Siebert, Philipp
Markert, Bernd
Effect of process parameters on the interface temperature in ultrasonic aluminum wire bonding
Journal Article (2018)
Mostafavi, Shimaalsadat (Corresponding author)
Hesser, Daniel Frank
Markert, Bernd
Biomechanical gait analysis of frail geriatric inpatients using four-wheeled walker
Abstract, Contribution to a conference proceedings, Journal Article (2018)
Batista Jr., João P.
Mundt, Marion
Schmidt, L.
Laurentius, Thea
Markert, Bernd
Bollheimer, C.
Deformation of Stacked Metallic Sheets by Shock Wave Loading
Journal Article (2018)
Patil, Sandeep P. (Corresponding author)
Murkute, Rahul
Shirafkan, Nima
Markert, Bernd
A diffusive dynamic brittle fracture model for heterogeneous solids and porous materials with implementation using a user-element subroutine
Journal Article (2018)
Pillai, Udit
Heider, Yousef (Corresponding author)
Markert, Bernd
Numerical simulation of the tissue differentiation and corrosion process of biodegradable magnesium implants during bone fracture healing
Journal Article (2018)
Ma, Songyun (Corresponding author)
Zhou, Bei
Markert, Bernd
A nonlinear visco-elastoplastic model for structural pounding
Journal Article (2018)
Bamer, Franz (Corresponding author)
Markert, Bernd (Corresponding author)
Artificial neural networks and intelligent finite elements in non-linear structural mechanics
Journal Article (2018)
Stoffel, Marcus (Corresponding author)
Bamer, Franz
Markert, Bernd
Multifield Problems
Contribution to a book (2017)
Schrefler, Bernhard A.
Simoni, L.
Markert, Bernd
A novel nonlinear nano-scale wear law for metallic brake pads
Journal Article (2018)
Patil, Sandeep P. (Corresponding author)
Chilakamarri, Sri Harsha
Markert, Bernd
Fracture of silica aerogels : An all-atom simulation study
Journal Article (2018)
Patil, Sandeep P. (Corresponding author)
Rege, Ameya Govind
Itskov, Mikhail
Markert, Bernd
The influence of the network topology on the deformation and fracture behaviour of silica glass : A molecular dynamics study
Journal Article (2018)
Ebrahem, Firaz (Corresponding author)
Bamer, Franz
Markert, Bernd
A Structural Pounding Formulation Using Systematic Modal Truncation
Journal Article (2018)
Shi, Jianye
Bamer, Franz (Corresponding author)
Markert, Bernd
Efficient numerical modeling of 3D-printed lattice-cell structures using neural networks
Contribution to a book, Journal Article (2018)
Koeppe, Arnd (Corresponding author)
Hernandez Padilla, Carlos Alberto
Voshage, Maximilian Alfons
Schleifenbaum, Johannes Henrich
Markert, Bernd
Assessment of the viscoelastic mechanical properties of polycarbonate urethane for medical devices
Journal Article (2018)
Beckmann, Agnes (Corresponding author)
Heider, Yousef
Stoffel, Marcus
Markert, Bernd
Validation of a thermo- and a hydromechanical model of a brake system for high-speed rail applications
Journal Article (2018)
Petry, Matthias (Corresponding author)
Lamjahdy, Abdelkrim
Jawad, Ali
Markert, Bernd
Murrenhoff, Hubertus
A new in vitro spine test rig to track multiple vertebral motions under physiological conditions
Journal Article (2017)
Beckmann, Agnes (Corresponding author)
Herren, Christian
Mundt, Marion
Siewe, Jan
Kobbe, Philipp
Sobottke, Rolf
Pape, Hans-Christoph
Stoffel, Marcus
Markert, Bernd
Simulation of Cyclic Loading Conditions Within Fluid-Saturated Granular Media
Contribution to a book (2017)
Ehlers, Wolfgang
Schenke, Maik (Corresponding author)
Markert, Bernd
The Influence of Motion Tasks on the Accuracy of Kinematic Motion Patterns of an Imu-Based Measurement System
Contribution to a book, Contribution to a conference proceedings (2017)
Mundt, Marion
Wisser, Anna
David, Sina
Dupré, Thomas
Quack, Valentin Michael
Bamer, Franz
Tingart, Markus
Potthast, Wolfgang
Markert, Bernd
Modelling of cyclic deformation behaviour of railway disc brakes under thermomechanical loading
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Zhang, Le (Corresponding author)
Ma, Songyun
Markert, Bernd
Molecular dynamics simulations of the cooling rate influence on the tensile strength of silica glass
Contribution to a conference proceedings, Journal Article (2017)
Ebrahem, Firaz (Corresponding author)
Markert, Bernd
Modelling of hydraulic fracturing and fluid flow change in saturated porous domains
Contribution to a conference proceedings, Journal Article (2017)
Heider, Yousef (Corresponding author)
Markert, Bernd
Heat transfer in multi-phase porous media with application to cancer detection
Contribution to a conference proceedings, Journal Article (2017)
Niedermeyer, Angela Monika (Corresponding author)
Heider, Yousef
Stoffel, Marcus
Markert, Bernd
Experimental and numerical study of glass fracture using J-integral and phase-field modelling approaches
Contribution to a conference proceedings, Journal Article (2017)
Li, Ziyuan (Corresponding author)
Heider, Yousef
Markert, Bernd
Thermomechanical measurement of a brake disc
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Lamjahdy, Abdelkrim (Corresponding author)
Markert, Bernd
Multiscale simulation of fracture of coated silica nanoparticles reinforced composites
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Ma, Songyun (Corresponding author)
Scheider, Ingo
Bargmann, Swantje
Markert, Bernd
Mechanobiological processes of tissue engineered cartilage replacement materials
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Nachtsheim, Julia
Markert, Bernd
Stoffel, Marcus (Corresponding author)
Biomechanical evaluation of a femoral neck fracture implant using a novel test-stand
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Mundt, Marion (Corresponding author)
Bettag, Sebastian
Bamer, Franz
Stoffel, Marcus
Knobe, Matthias
Markert, Bernd
An experimental and numerical study of gas pressure forming under shock-wave loading
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Shirafkan, Nima (Corresponding author)
Markert, Bernd
Stoffel, Marcus
Modelling of the deformation-dependent fluid flow in the fibrous gas diffusion layer of fuel cells
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Chaaban, Mohamad (Corresponding author)
Heider, Yousef
Markert, Bernd
A thermomechanical analysis of interfaces between the mating parts in ultrasonic wire bonding
Contribution to a conference proceedings, Journal Article (2017)
Mostafavi, Shimaalsadat (Corresponding author)
Heider, Yousef
Markert, Bernd
A machine-learning approach to load-monitoring based on guided waves
Contribution to a conference proceedings, Journal Article (2017)
Hesser, Daniel Frank (Corresponding author)
Markert, Bernd
Stress-induced long-range ordering in spider silk
Journal Article (2017)
Wagner, Johannes A.
Patil, Sandeep P.
Greving, Imke
Lämmel, Marc
Gkagkas, Konstantinos
Seydel, Tilo
Müller, Martin
Markert, Bernd
Gräter, Frauke (Corresponding author)
Biomaterial spider silk : Potential candidate for airbag fabric material
Abstract, Contribution to a conference proceedings, Journal Article (2017)
Prajapati, Kaushik (Corresponding author)
Patil, Sandeep P.
Carmai, Julaluk
Koetniyom, Saiprasit
Markert, Bernd
Efficient solution of the multiple seismic pounding problem using hierarchical substructure techniques
Journal Article (2017)
Bamer, Franz (Corresponding author)
Shi, Jianye
Markert, Bernd
An explicit reduced order integration scheme for contact problems in structural dynamics
Contribution to a conference proceedings, Journal Article (2017)
Shi, Jianye (Corresponding author)
Bamer, Franz
Markert, Bernd
3D modelling of brittle fracture using a joint all-atom and phase-field approach
Journal Article (2017)
Hernandez Padilla, C. A. (Corresponding author)
Patil, Sandeep P.
Heider, Yousef
Markert, Bernd
Assessment of the high-cycle fatigue performance of a PEEK-based spinal dynamic instrumentation using numerical simulation and experimental data
Contribution to a conference proceedings, Journal Article (2017)
Beckmann, Agnes (Corresponding author)
Ma, Songyun
Stoffel, Marcus
Markert, Bernd
An efficient Monte Carlo simulation strategy based on model order reduction and artificial neural networks
Contribution to a conference proceedings, Journal Article (2017)
Bamer, Franz (Corresponding author)
Koeppe, Arnd
Markert, Bernd
Neural network representation of a phase-field model for brittle fracture
Contribution to a conference proceedings, Journal Article (2017)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Hernandez Padilla, Carlos Alberto
Markert, Bernd
Experimental and Numerical Studies of Sheet Metal Forming with Damage Using Gas Detonation Process
Contribution to a book, Journal Article (2017)
Patil, Sandeep P. (Corresponding author)
Prajapati, Kaushik
Jenkouk, Vahid
Olivier, Herbert
Markert, Bernd
Analytical Homogenization for Dynamic Analysis of Composite Membranes with Circular Inclusions in Hexagonal Lattice Structures
Contribution to a conference proceedings, Journal Article (2017)
Andrianov, Igor Vasylovyc
Awrejcewicz, J.
Markert, Bernd
Starushenko, G. A.
A systematic review of gait analysis methods based on inertial sensors and adaptive algorithms
Journal Article (2017)
Caldas, Rafael (Corresponding author)
Mundt, Marion
Potthast, Wolfgang
Buarque de Lima Neto, Fernando
Markert, Bernd
Special Issue on Phase Field Modeling
Book (2017)
Müller, Ralf (Editor)
Markert, Bernd (Editor)
A coupled ductile fracture phase-field model for crystal plasticity
Contribution to a book, Journal Article (2015)
Hernandez Padilla, Carlos Alberto (Corresponding author)
Markert, Bernd
A finite element analysis of the influences of ultrasonic welding parameters on temperature rise at interfaces of aluminum strands in wire bonding process
Contribution to a book, Contribution to a conference proceedings (2017)
Mostafavi, Shimaalsadat (Corresponding author)
Markert, Bernd
An efficient response identification strategy for nonlinear structures subject to nonstationary generated seismic excitations
Contribution to a conference proceedings, Journal Article (2017)
Bamer, Franz (Corresponding author)
Markert, Bernd
A comparative study of mechanical properties of fresh and frozen-thawed porcine intervertebral discs in a bioreactor environment
Journal Article (2016)
Azarnoosh, Marzieh (Corresponding author)
Stoffel, Marcus
Quack, Valentin Michael
Betsch, Marcel
Rath, Björn
Tingart, Markus
Markert, Bernd
Towards bioreactor development with physiological motion control and its applications
Journal Article (2016)
Stoffel, Marcus (Corresponding author)
Willenberg, Wolfgang
Azarnoosh, Marzieh
Fuhrmann-Nelles, Nadine
Zhou, Bei
Markert, Bernd
Self-Organizing Maps and Fuzzy C-Means Algorithms on Gait Analysis Based on Inertial Sensors Data
Contribution to a book, Contribution to a conference proceedings (2017)
Caldas, Rafael (Corresponding author)
Hu, Yabing
Buarque de Lima Neto, Fernando
Markert, Bernd
Mechanics of Nanostructured Porous Silica Aerogel Resulting from Molecular Dynamics Simulations
Journal Article (2017)
Patil, Sandeep P. (Corresponding author)
Rege, Ameya Govind
Sagardas, Sagardas
Itskov, Mikhail
Markert, Bernd
Biomechanical testing of a PEEK-based dynamic instrumentation device in a lumbar spine model
Journal Article (2017)
Herren, Christian (Corresponding author)
Beckmann, Agnes
Meyer, Sabine
Pishnamaz, Miguel
Mundt, Marion
Sobottke, Rolf
Prescher, Andreas
Stoffel, Marcus
Markert, Bernd
Kobbe, Philipp
Pape, Hans-Christoph
Eysel, Peer
Siewe, Jan
A phase-field modeling approach of hydraulic fracture in saturated porous media
Journal Article (2016)
Heider, Yousef (Corresponding author)
Markert, Bernd
Multiaxial fatigue life assessment of sintered porous iron under proportional and non-proportional loadings
Journal Article (2017)
Ma, Songyun (Corresponding author)
Markert, Bernd
Yuan, Huang
A new monolithic Newton-multigrid-based FEM solution scheme for large strain dynamic poroelasticity problems
Journal Article (2017)
Obaid, A. (Corresponding author)
Turek, St.
Heider, Yousef
Markert, Bernd
A Nonlinear Deterministic Mode Decomposition Strategy for High-Dimensional Monte Carlo Simulations
Contribution to a conference proceedings, Journal Article (2016)
Bamer, Franz (Corresponding author)
Markert, Bernd (Corresponding author)
Effects of active muscle contraction on whiplash injury
Contribution to a conference proceedings, Journal Article (2016)
Sharma, Nisha N. (Corresponding author)
Carmai, Julaluk
Koetniyom, Saiprasit
Markert, Bernd
Simulation of stiffness analysis of rubber material applied in resilient wheel
Contribution to a conference proceedings, Journal Article (2016)
Zhang, Le (Corresponding author)
Markert, Bernd
Model reduction and submodelling using neural networks
Contribution to a conference proceedings, Journal Article (2016)
Koeppe, Arnd (Corresponding author)
Bamer, Franz
Markert, Bernd
Optimal Frequency selection for vibration based damage detection using pattern recognition
Contribution to a conference proceedings, Journal Article (2016)
Hesser, Daniel Frank (Corresponding author)
Markert, Bernd (Corresponding author)
Experimental and numerical investigation of tendons and tendon cells
Contribution to a conference proceedings, Journal Article (2016)
Willenberg, Wolfgang (Corresponding author)
Azarnoosh, Marzieh
Stoffel, Marcus
Markert, Bernd
Physiological loading of cartilage replacement materials in a bioreactor environment
Contribution to a conference proceedings, Journal Article (2016)
Fuhrmann-Nelles, Nadine (Corresponding author)
Willenberg, Wolfgang
Stoffel, Marcus
Markert, Bernd
An examination of tissue engineered scaffolds in a bioreactor
Contribution to a conference proceedings, Journal Article (2016)
Niedermeyer, Angela Monika (Corresponding author)
Zhou, Bei
Dursun, Gözde
Stoffel, Marcus
Artmann, Aysegül
Markert, Bernd
Simulation of the temperature and wear behaviour of a disc brake
Contribution to a conference proceedings, Journal Article (2016)
Lamjahdy, Abdelkrim (Corresponding author)
Ali, Jawad
Markert, Bernd
A nano-macro bottom-up approach towards brittle fracture
Contribution to a book, Contribution to a conference proceedings (2016)
Patil, Sandeep P. (Corresponding author)
Heider, Yousef (Corresponding author)
Hernandez Padilla, Carlos Alberto (Corresponding author)
Cruz-Chú, Eduardo R. (Corresponding author)
Markert, Bernd (Corresponding author)
A combined molecular dynamics-phase-field modelling approach to fracture
Contribution to a conference proceedings, Journal Article (2016)
Patil, Sandeep P. (Corresponding author)
Heider, Yousef
Hernandez Padilla, Carlos Alberto
Cruz-Chú, Eduardo
Markert, Bernd
Joining of tubes by gas detonation forming
Contribution to a conference proceedings, Journal Article (2016)
Jenkouk, Vahid (Corresponding author)
Patil, Sandeep P.
Markert, Bernd
Numerical modelling of the gas detonation process of sheet metal forming
Contribution to a conference proceedings, Journal Article (2016)
Patil, Sandeep P. (Corresponding author)
Popli, Madhur
Jenkouk, Vahid
Markert, Bernd
Excitation strategies for vibration based damage detection using piezoelectric transducers and machine learning
Contribution to a conference proceedings, Journal Article (2016)
Hesser, Daniel Frank (Corresponding author)
Markert, Bernd
A finite element analysis of effects of ultrasonic welding parameters on the temperature distribution in wire bonding
Contribution to a conference proceedings, Journal Article (2016)
Mostafavi, Shimaalsadat (Corresponding author)
Markert, Bernd
Development and experimental validation of a patient-specific lumbar spine FE model to predict the effects of instrumentations
Contribution to a conference proceedings, Journal Article (2016)
Beckmann, Agnes (Corresponding author)
Mundt, Marion
Herren, Christian
Siewe, Jan
Kobbe, Philipp
Sobottke, Rolf
Stoffel, Marcus
Markert, Bernd
A novel model to describe the intervertebral disc mechanical response
Contribution to a conference proceedings, Journal Article (2016)
Azarnoosh, Marzieh (Corresponding author)
Heider, Yousef
Stoffel, Marcus
Markert, Bernd
Theoretical and experimental investigation of bone fracture in the human proximal femur
Contribution to a conference proceedings, Journal Article (2016)
Hülsmann, Angelina (Corresponding author)
Stoffel, Marcus
Heider, Yousef
Knobe, Matthias
Markert, Bernd
Simulation of hydraulic fracture of porous materials using the phase-field modeling approach
Contribution to a conference proceedings (2016)
Heider, Yousef (Corresponding author)
Markert, Bernd
A comparative molecular dynamics-phase-field modeling approach to brittle fracture
Contribution to a book, Journal Article (2016)
Patil, Sandeep P. (Corresponding author)
Heider, Yousef
Hernandez Padilla, Carlos Alberto
Cruz-Chú, Eduardo R.
Markert, Bernd
Analysis of micro-structural effects on phononic waves in layered elastic media with periodic nonsmooth coordinates
Journal Article (2016)
Pilipchuk, Valery N. (Corresponding author)
Andrianov, Igor Vasylovyc
Markert, Bernd
Coupled Multi-Field Continuum Methods for Porous Media Fracture
Contribution to a book, Contribution to a conference proceedings (2015)
Markert, Bernd (Corresponding author)
Heider, Yousef
Asymptotic decomposition in the problem of joined elastic plates
Journal Article (2014)
Kolpakov, A. G. (Corresponding author)
Andrianov, Igor Vasylovyc (Corresponding author)
Markert, Bernd (Corresponding author)
Effects of osteoarthritis and pathological walking on contact stresses in femoral cartilage
Journal Article (2015)
Mabuma, J.
Schwarze, M.
Hurschler, C.
Markert, Bernd
Ehlers, W. (Corresponding author)
Nonlinear vibrations and mode interactions for a continuous rod with microstructure
Journal Article (2015)
Andrianov, Igor V.
Danishevskyy, Vladyslav V. (Corresponding author)
Markert, Bernd
Structural damage detection using auto correlation functions of vibration response under sinusoidal excitation
Contribution to a conference proceedings, Journal Article (2015)
Zhang, Muyu (Corresponding author)
Schmidt, Rüdiger
Markert, Bernd
Structural damage detection methods based on the correlation functions
Contribution to a book, Contribution to a conference proceedings (2014)
Zhang, Muyu (Corresponding author)
Schmidt, Rüdiger (Corresponding author)
Markert, Bernd (Corresponding author)
Experimental and numerical investigation of a degradable collagen foil
Contribution to a conference proceedings, Journal Article (2014)
Willenberg, Wolfgang (Corresponding author)
Stoffel, Marcus
Markert, Bernd
Asymptotic decomposition in the problem of joined elastic plates
Preprint (2014)
Andrianov, Igor Vasylovyc (Corresponding author)
Kolpakov, A. G. (Corresponding author)
Markert, Bernd (Corresponding author)
Multi-dimensional, mechanical stimulation of cartilage implants
Contribution to a conference proceedings, Journal Article (2014)
Fuhrmann-Nelles, Nadine (Corresponding author)
Rath, Björn
Stoffel, Marcus
Markert, Bernd
Cellular articular cartilage replacement tissues: Modeling and analysis
Contribution to a conference proceedings, Journal Article (2014)
Chehadé, Mohammad (Corresponding author)
Zhou, Bei
Stoffel, Marcus
Markert, Bernd
The Cyclic Thermomechanical Coupled Problem of Thermal Gradients in Friction Railway Disc Brakes
Contribution to a conference proceedings, Journal Article (2014)
Lamjahdy, Abdelkrim (Corresponding author)
Brunel, Jean-François
Lamure, Benjamin
Dufrenoy, Phillip
Weichert, Dieter
Markert, Bernd
A coupled phase-field model for ductile fracture in crystal plasticity
Contribution to a conference proceedings, Journal Article (2014)
Hernandez Padilla, Carlos Alberto (Corresponding author)
Markert, Bernd
Viscous Friction between Crystalline and Amorphous Phase of Dragline Silk
Journal Article (2014)
Patil, Sandeep P.
Xiao, Senbo
Gkagkas, Konstantinos
Markert, Bernd
Gräter, Frauke
The dynamic response of fluid-saturated porous materials with application to seismically induced soil liquefaction
Journal Article (2014)
Heider, Yousef
Avci, O.
Markert, Bernd (Corresponding author)
Ehlers, W.
Rate-Dependent Behavior of the Amorphous Phase of Spider Dragline Silk
Journal Article (2014)
Patil, Sandeep P.
Markert, Bernd
Gräter, Frauke (Corresponding author)
On a fully implicit, monolithic finite element method-multigrid solution approach for dynamic porous media problems
Journal Article (2013)
Turek, Stefan
Obaid, Abdulrahman
Markert, Bernd
Simplified non-linear dynamical equations of circular cylindrical shells
Journal Article (2013)
Andrianov, Igor V. (Corresponding author)
Markert, Bernd
A survey of selected coupled multifield problems in computational mechanics
Journal Article (2013)
Markert, Bernd